Shown on model 204 |
1 | Slide |
1a | Clip |
2 | Activated charcoal dust filter |
3 | AC housing |
A32m1 | Blower motor |
P83.00-2268-06
| Remove | ||
1 | Remove cover below right dashboard | ||
| |||
2 | Lever up and remove clips (1a) | ||
3 | Unlock slide (1) in the direction of the arrow and remove activated charcoal dust filter (2) downwards from air conditioner housing (3) | ||
| Clean | ||
4 | Clean area surrounding air conditioner housing (3) | ||
| Disassemble | ||
5 | Remove slide (1) from old activated charcoal dust filter (2) | ||
| Assemble | ||
6 | Mount slide (1) at new activated charcoal dust filter (2) | ||
| Install | ||
7 | Slide new activated charcoal dust filter (2) into air conditioner housing (A32) | The arrow marked on the activated charcoal dust filter (2) must point toward the blower motor (A32m1). | |
8 | Lock activated charcoal dust filter (2) with slide (1) against the direction of the arrow | The recess on the air conditioner housing cover must point toward the center console. | |
9 | Press clamps (1a) together | ||
10 | Install cover below dashboard on right | ||
|