Read out map data status from COMAND navigation system

AP82.85-P-8251C

4.9.15

Model

169, 203, 209, 211, 219, 230, 245

	Preparatory tasks
1	Switch on COMAND controller unit and remove all CDs or DVDs
2	Enable data storage media slot	With CODE 512 (COMAND APS incl. DVD changer)
	Check
3	Insert master DVD 1	 The map data version installed in the COMAND controller unit and available on the master DVD 1 is displayed.
4	Note the displayed map data version on the service sheet and compare with the map version currently available	If the map data version is up to date:
		
		Test complete; continue with step 7.
		With map data release that is not up to date:
		
		Proceed with step 5.
5	Check whether the customer is entitled to a free-of-charge map data update	Initial registration was max. 3 years ago. Only for certain markets (see Service Information bulletin).
		The customer is entitled to a free-of-charge map data update:
		
		Subject to a separate repair order, update the map data free of charge (for cost settlement, see Service Information bulletin).
		* Map update
		

		Service Information: Free map updates for COMAND Model 169, 245Up to 3 years as of initial registration date	SI82.85-P-0019A
		The customer is not entitled to a free-of-charge map data update:
		
		Check with the customer whether map data should be updated subject to a charge. Continue with step 6.
6	Check whether the customer desires a chargeable map data update	The customer desires a chargeable map data update:
		
		Subject to separate repair order, update the map data.
		Model 169, 245	AP82.85-P-8252A
		The customer does not desire a chargeable map data update:
		
		Test complete; continue with step 7.
	Restore input condition
7	Remove master DVD 1	 Master DVD 1 must remain in the workshop and may not be handed out to the customer.
8	Insert previously removed CDs or DVDs and switch off COMAND controller unit

เอกสารที่อ้างถึง