ap8230s8252cv

Windshield wipers, windshield washer system and headlamp cleaning system - function check

ประเภท ap · หัวข้อ 82.30 · เวอร์ชัน 0102 · 2013-12-03

ใช้กับ: MODEL 415

ไม่มีใน “th” แสดงเป็น อังกฤษ

ตำแหน่ง

กลุ่มฟังก์ชัน 3 Body › 82 Electrical system, body › 82.30 Windshield wipers — ซีรีส์ 415

EinPAS 36 Visibility › 36.30 Wiping/washing › 36.30.1 Basic information — ซีรีส์ 415

AP82.30-S-8252CV

Windshield wipers, windshield washer system and headlamp cleaning system - function check

28.11.2013

MODEL

415

Windshield wipers, windshield washer system and headlamp cleaning system -      
	function check

1

Windshield wiper switch

2

Rear wiper switch

3

Wiper-blade rubber

A

Switch on/off front window windshield wiper

B

Switch on/off rear window wiper

C

Switch on/off rear window windshield washer system

D

Switch on/off front window windshield washer system

S82.30-4536-04

Check windshield wiper

1

Check wiper rubber (3)

Check the condition of the wiper rubbers (3) for the front and rear window.

If the wiper rubbers are damaged:

Subject to a separate repair order, replace the wiper rubbers.

2

Switch on windshield wipers at windshield wiper switch (1) (arrow A), and then switch off

If defective:

Subject to a separate repair order, determine the cause and rectify the fault.

3

Switch on rear window wiper at rear window wiper switch (2) (arrow B), and then switch off

If defective:

Subject to a separate repair order, determine the cause and rectify the fault.

Check windshield washer system

4

Switch on windshield washer system for front window (arrow D) and check spray nozzles

When doing so, also check the spray pattern. The washer fluid must not spray over the roof or beyond the sides of the vehicle. Correct the spray pattern if necessary by adjusting the spray nozzles with a suitable tool.

If defective:

Subject to a separate repair order, determine the cause and rectify the fault.

5

Operate rear window washer system (arrow C) and check spray nozzle

When doing so, also check the spray pattern. Correct the spray pattern if necessary by adjusting the spray nozzles with a suitable tool.

If defective:

Subject to a separate repair order, determine the cause and rectify the fault.