Check and correct headlamp adjustment

AP82.10-P-8260RR

22.4.03

MODEL 452.3/ 4

P82.10-3397-06

E1/1 Left radiator grille lamp unit

E1e1 Left high beam

E1e2 Left low beam

E2/1 Right radiator grille lamp unit

E2e1 Right high beam

E2e2 Right low beam

	Check
1	Drive vehicle onto level surface.	The vehicle level must not change when the brake pedal is pressed. Vehicle must be in curb condition (curb weight, full fuel tank or corresponding additional weight).
2	Correct tire inflation pressure		AP40.15-P-4061RR
3	Have person sit on driver's seat or place load of 75 kg on seat.	 Move vehicle back and forward in order to adjust the axle setting.
4	Align headlamp beam adjuster to the vehicle and carry out height setting in relation to center of headlamp.	 Observe operating instructions for headlamp adjustment testing unit.
		 Headlamp beam adjuster	*WE58.40-Z-1006-19A
5	Check adjustment of left low beam (E1e2) or right low beam (E2e2)	If adjustment is necessary, see: 
		Set low beam	AP82.10-P-8260-01RR
		 Headlamp beam adjuster	*WE58.40-Z-1006-19A
6	Check adjustment of left high beam (E1e1) or right high beam (E2e1)	If adjustment is necessary, see: 
		Check setting of high beam	AP82.10-P-8260-02RR
		 Headlamp beam adjuster	*WE58.40-Z-1006-19A
7	Check adjustment of the left radiator grille lamp unit (E1/1) or right radiator grille lamp unit (E2/1)	If adjustment is necessary, see: 
		Set or inspect fog lamps	AP82.10-P-8260-04RR
		 Headlamp beam adjuster	*WE58.40-Z-1006-19A

Workshop equipment

WE58.40-Z-1006-19A

Headlamp adjustment testing unit