Prepare vehicle for checking/correcting headlamp adjustment

AP82.10-P-8260-10F

Prepare vehicle for checking/correcting headlamp adjustment

Model

257

1

For checking or correcting the headlamp adjustment, the vehicle must be correctly positioned on the headlamp adjustment station and the vehicle must be in a ready-to-drive condition.

 Vehicle in ready-to-drive condition means:
Correct tire pressure,
Correctly calibrated vehicle level including zero position adjustment,
Steering is in straight-ahead position.

 Model 257
except code 489 (AIR BODY CONTROL)
The vehicle must be unladen.

2

Close doors.

3

Activate "Comfort" mode.

View of lower control panel in vehicle with automatic transmission and with code 448 (Touchpad)

N72/4s2

Vehicle level button

4

Model 257
with code 448 (Touchpad)
with code 489 (AIR BODY CONTROL)
Vehicle level button (N72/4s2) is at "normal level", LED does not light up.

5

Model 257 with transmission 725
with code 448 (Touchpad)
with code 489 (AIR BODY CONTROL)
Hold down vehicle level button (N72/4s2) for 5 s and move to calibrated vehicle level, LED lights up.

 Release vehicle level button (N72/4s2) immediately after 5 seconds.
Otherwise the vehicle runs completely to the raised level.

 The calibrated vehicle level is automatically reset after a change in ignition status or vehicle speed  2 km/h.

Once the vehicle has moved all the way to the raised level,