01 | Headlamp aimer |
1 | Central mark |
H | Height adjusting screw |
S | Side position adjusting screw |
P82.10-7672-06
The high beams are adjusted when the corresponding low beams are adjusted and may not be adjusted separately.
1 | Position the headlamp aimer (01) in front of the left or right high beam |
2 | Check setting of high beam |
Do not perform corrections at the height adjustment screw (H) and side adjustment screw (S) of the corresponding headlamp. |
The center of the light beam must be positioned on the central mark (1) in the headlamp aimer (01). |
If the high beam setting is not OK:
Rectify the problem subject to a separate repair order.