Check setting of high beam

AP82.10-P-8260-02EC

Check setting of high beam

MODEL

207

with halogen headlamps

1

 Check setting of high beam headlamps.

 The center of the light beam must be positioned on the central mark (1) in the headlamp aimer (01).

 In the event of a deviation check the correct seat of the bulb in the headlamp.

 Do not make any correction to the adjustment screws for the headlamp height adjustment (H) and the adjustment screws for the headlamp side adjustment (S), as this would adjust the previously set low beam.

01

Headlamp aimer

1

Central mark

H

Adjustment screw for height adjustment

S

Adjustment screw for side adjustment