Check setting of high beam

AP82.10-P-8260-02E

Check setting of high beam



Notes on working in engine compartment

AH60.00-P-0042-01RG

MODEL

190

Shown on ECE version headlamp

01

Headlamp aimer

1

Central mark

H

Height adjusting screw

S

Side position adjusting screw

E1

Left front lamp unit

E1e1

Left high beam

E1e2

Left low beam

1

Align headlamp aimer (01) parallel to vehicle level with high beam at left (E1e1) or right

2

Check setting of high beam

 Corrections must not be made to the adjustment screws (H, S) on the headlamp.
Otherwise, the previously-adjusted low beam will be misadjusted!

 The center of the light beam must be positioned on the central mark (1) in the headlamp aimer (01).

If high beam alignment is not correct: