Check setting of high beam

AP82.10-P-8260-02D

Check setting of high beam

Model

205, 253

Shown on ECE version headlamp in model 205

01

Headlamp aimer

1

Central mark

H

Adjustment screw

S

Adjustment screw

Halogen headlamp, shown on model 205

E1

Left front lamp unit

E1e1

Left high beam

E1e2

Left low beam

Static LED headlamp, shown on model 205

E1

Left front lamp unit

E1e1

Left high beam

E1e2

Left low beam

Dynamic LED headlamp, shown on model 205

E1

Left front lamp unit

E1e1

Left high beam

E1e15

Left low beam (short range)

E1e16

Left low beam (long range)

1

Align headlamp aimer (01) parallel to vehicle level with high beam at left (E1e1) or right

2

Check setting of high beam

 Corrections must not be made to the adjustment screws (H, S) on the headlamp.
Otherwise, the previously-adjusted low beam will be misadjusted!

 The center of the light beam must be positioned on the central mark (1) in the headlamp aimer (01).

If high beam alignment is not correct:



Rectify problem subject to separate repair order.