AP82.10-P-8260-01RT | Set low beam | ||
Danger | Risk of death when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC) | Do not touch damaged or defective live component parts and lines or non-insulated electrical connections and lines. | |
Danger | Risk of explosion/risk of fire caused by highly flammable materials in the vicinity of damaged xenon bulbs. Risk of injury caused by UV light, hot components on xenon headlamps and glass splinters produced by bursting xenon bulbs. Risk of poisoning caused by inhalation of mercury vapors and by swallowing of/skin contact with toxic salts and mercury compounds. | Do not touch parts conducting high voltage. Persons with active electronic implants (e.g. cardiac pacemakers) must never work on xenon headlamps. Switch off the entire lighting system. Wear insulated safety shoes, safety glasses and protective gloves. Remove highly inflammable materials from the danger zone. Ensure sufficient ventilation in the working area. |
When adjusting the height the light-dark boundary of the luminous beam must be coincident with the horizontal separating line (4) in the headlamp aimer . When carrying out the lateral setting, the bent line (5) of the luminous beam must lie below the central mark (6) and start on the horizontal broken line (4).
4 | Broken line |
5 | Line |
6 | Central mark |
P82.10-0203-01
1 | Check adjustment of low beam headlamps. |
2.1 | For vehicles equipped with halogen headlamps, when low beam headlamp setting is not OK |
2.2 | For vehicles equipped with xenon headlamps, when low beam headlamp setting is not OK |
To do so, connect STAR DIAGNOSIS and perform zero position adjustment of axle and level sensors. |