P77.20-2890-09
Shown: Model 463.234 with code D27 (Power tilting/sliding glass sunroof) |
1 | Sliding roof | 3 | Lubrication point | |
2 | Guide rail | 4 | Wind deflector |
Warning | Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof. | No parts of the body or limbs should be within the operating area when the components are moving. | |
Preparatory activity | |||
1 | Open sliding roof (1) | ||
| Clean | ||
2 | Clean pivot arms of wind deflector (4) using rag | Vehicle with wind deflector (4) on sliding roof (1). | |
3 | Clean guide rails (2) over entire length using rag | ||
4 | Clean lubrication point (3) using rag | ||
Lubricate | |||
5 | Apply thin coating of grease to pivot arms of wind deflector (4) | Vehicle with wind deflector (4) on sliding roof (1). | |
Synthetic grease, sliding roof 500 g, DB supply specification 6827.60 | |||
6 | Apply thin coating of grease to contact surfaces of guide rails (2) over entire length | Synthetic grease, sliding roof 500 g, DB supply specification 6827.60 | |
7 | Apply thin coating of grease to lubricating point (3) | Synthetic grease, sliding roof 500 g, DB supply specification 6827.60 | |
| Check | ||
8 | Perform function test on sliding roof (1) | ||
| Clean | ||
9 | Remove excess grease | ||
Finishing activity | |||
10 | Close sliding roof (1) |