Work procedure:
Remove dry dirt, such as dust, ash and similar, using a vacuum cleaner. If this is not possible, e.g. if the dry dirt is deep-seated, brush seat with a nylon or natural bristle brush (no metal brushes) and suction off.
Clean strong stains and soiling with MB car shampoo to start with . Absorb MB car shampoo with an absorbent rag or a paper towel and dry (if necessary, with a hot air blower). If this is not successful, clean with MB stain remover after drying.
To do so, use rags soaked with MB stain remover. In general, absorb loosened stain substances with an absorbent rag or paper towel and dry off.
Stains without a fringe formation cannot always be removed. In these cases, clean entire part or entire surface uniformly.
After the spray-suction procedure, carpets can also be cleaned with carpet cleaning devices (e.g. Puzzi device from Kärcher or similar).