P54.33-5348-79
Shown: instrument cluster with code K36 (Instrument cluster with color 8.9 cm (3.5") display) |
1 | 12 V battery warning lamp | 4 | Multifunction display | |
2 | Door OPEN warning lamp | 5 | Speedometer | |
3 | Operational readiness display indicator lamp |
6 | High-voltage battery consumption display |
7 | High-voltage battery charge level display |
P54.33-5349-76
Preparatory activity | |||
1 | Switch electronic ignition lock control unit to position "2" (circuit 15) | ||
| Check | ||
2 | Check 12 V battery warning lamp (1) | The 12 V battery warning lamp (1) must light up. | |
If there is a problem | |||
| |||
Rectify problem subject to separate repair order. | |||
3 | Check door ajar warning lamp (2) | The door ajar warning lamp (2) must light up. | |
If there is a problem | |||
| |||
Rectify problem subject to separate repair order. | |||
4 | Check operational readiness display indicator lamp (3) | The operational readiness display indicator lamp (3) must light up. | |
If there is a problem | |||
| |||
Rectify problem subject to separate repair order. | |||
5 | Manually switch on the exterior lights | ||
6 | Check instrument illumination | All pointer instruments, speedometer (5), tachometer, high-voltage battery consumption display (6), high-voltage battery charge level display (7) and clock must be illuminated and the background illumination of the multifunction display (4) must be activated. | |
If there is a problem | |||
| |||
Rectify problem subject to separate repair order. | |||
7 | Check multifunction display (4) for visible pixel errors | If the multifunction display (4) exhibits vertical stripes, failed segments or black dots | |
| |||
Rectify problem subject to separate repair order. | |||
8 | Manually switch off exterior lights | ||
9 | Switch on lamps in passenger compartment and check for proper operation | Check inside rear-view mirror, reading, mirror and glove compartment lamps. | |
If there is a problem | |||
| |||
Rectify problem subject to separate repair order. | |||
Finishing activity | |||
10 | Reset switch positions to input condition | ||
11 | Switch electronic ignition lock control unit to position "0" |