ap5430p5451slb

Check warning and function indicator lamps in instrument cluster

ประเภท ap · หัวข้อ 54.30 · เวอร์ชัน 0101 · 2016-03-22

ใช้กับ: Model 172

ไม่มีใน “th” แสดงเป็น อังกฤษ

ตำแหน่ง

กลุ่มฟังก์ชัน 2 Chassis › 54 Electrical system, equipment and instruments › 54.30 Instrument cluster, display instruments, hazard warning device — ซีรีส์ 172

AP54.30-P-5451SLB

Check warning and function indicator lamps in instrument cluster

07.03.2016

Model

172

Check warning and function indicator lamps in instrument cluster

1

Left turn signal indicator light

2

Right turn signal indicator light

3

High beam indicator lamp

4

Low beam indicator lamp

5

Rear fog lamp indicator lamp

6

Standing lamps indicator lamp

7

Brake fluid and parking brake warning lamp

8

Anti-lock braking system indicator lamp

9

Brake system warning lamp

10

Parking brake indicator lamp

11

ESP® / ESP® OFF warning lamp

12

Parking brake indicator lamp

13

Seat belt warning lamp

14

Supplemental restraint system indicator lamp

15

DISTRONIC warning lamp with code 233 (DISTRONIC PLUS) or with code 239 (DISTRONIC PLUS) or with code 258 (COLLISION PREVENTION ASSIST)

16

Engine diagnosis indicator lamp

17

Fuel reserve indicator lamp

18

Front fog lamps indicator lamp

19

Power steering warning lamp

20

Tire pressure monitor warning lamp with code 475 (Tire pressure monitor)

21

Lamp failure signal in multifunction display

P54.33-3123-81

Preparatory activity

1

Switch electronic ignition lock control unit to position "2" (circuit 15)

Close the engine hood, the liftgate and all doors.

2

Operate parking brake

3

Switch on standing lights

Check

4

Check warning lamps (7, 9, 10, 11, 13, 15, 17, 19, 20) and indicator lamps (6, 8, 12, 14, 16, 18) for proper operation

If present.

If complaint present

Rectify problem subject to separate repair order.

5

Manually switch on low beams

The low beams indicator lamp (4) must light up and a lamp failure message must not be displayed in the multifunction display (21).

If complaint present

Rectify problem subject to separate repair order.

6

Switch on high beam

The high beams indicator lamp (3) must light up and a lamp failure message must not be displayed in the multifunction display (21).

If complaint present

Rectify problem subject to separate repair order.

7

Switch on rear fog lamp

If present.

The rear fog light indicator lamp (5) must light up and a lamp failure message must not be displayed in the multifunction display (21).

If complaint present

Rectify problem subject to separate repair order.

8

Engage reverse gear and press service brake

There must be no lamp failure message in the multifunction display (21).

If complaint present

Rectify problem subject to separate repair order.

9

Switch on hazard warning system

The left turn signal light indicator lamp (1) and right turn signal light indicator lamp (2) flash in unison in the multifunction display. There must be no lamp failure message in the multifunction display (21).

If complaint present

Rectify problem subject to separate repair order.

10

Switch off hazard warning system

Finishing activity

11

Reset switch positions to input condition

12

Switch electronic ignition lock control unit to position "0"