1 | Left turn signal indicator light |
2 | Right turn signal indicator light |
3 | High beam indicator lamp |
4 | Low beam indicator lamp |
5 | Rear fog light indicator lamp except code 460 (Canada version) and except code 494 (USA version) |
6 | Standing lamps indicator lamp |
7 | Brake fluid and parking brake indicator lamp |
8 | Anti-lock braking system indicator lamp |
9 | Brake system warning lamp |
10 | Parking brake indicator lamp |
11 | ESP® warning lamp |
12 | Parking brake indicator lamp |
13 | Seat belt warning lamp |
14 | SRS indicator lamp |
15 | DISTRONIC warning lamp with code 258 (COLLISION PREVENTION ASSIST) |
16 | Engine diagnosis indicator lamp |
17 | Fuel reserve indicator lamp |
20 | Tire pressure monitor warning lamp with code 475 (Tire pressure monitor) |
21 | Lamp failure signal in multifunction display |
P54.33-4664-81
Preparatory tasks | |||
1 | Switch electronic ignition lock control unit to position "2" (circuit 15) | Close the engine hood, the liftgate and all doors. | |
2 | Operate parking brake | ||
| Check | ||
3 | Check warning lamps (9, 11, 12, 13, 15, 17, 20) and indicator lamps (1, 2, 3, 4, 5, 6, 7, 8, 10, 14, 16) for proper operation | If there are problems: | |
| |||
Rectify problem subject to separate repair order. | |||
4 | Manually switch on low beams | The low beams indicator lamp (4) must light up and a lamp failure message must not be displayed in the multifunction display (21). | |
If there are problems: | |||
| |||
Rectify problem subject to separate repair order. | |||
5 | Switch on high beam | The high beams indicator lamp (3) must light up and a lamp failure message must not be displayed in the multifunction display (21). | |
If there are problems: | |||
| |||
Rectify problem subject to separate repair order. | |||
6 | Switch on rear fog lamp | The rear fog light indicator lamp (5) must light up and a lamp failure message must not be displayed in the multifunction display (21). | |
If there are problems: | |||
| |||
Rectify problem subject to separate repair order. | |||
7 | Engage reverse gear and press service brake | There must be no lamp failure message in the multifunction display (21). | |
If there are problems: | |||
| |||
Rectify problem subject to separate repair order. | |||
8 | Switch on hazard warning system | The left and right turn signal light indicator lamps (1, 2) flash in unison in the multifunction display. | |
If there are problems: | |||
| |||
Rectify problem subject to separate repair order. | |||
9 | Switch off hazard warning system | ||
Finishing activity | |||
10 | Switch electronic ignition lock control unit to position "0" |