ap5410p5458e

Check charging cable and vehicle socket

ประเภท ap · หัวข้อ 54.10 · เวอร์ชัน 0102 · 2020-02-14

ใช้กับ: Model 118.386/686, 177.086/186, 247.086/786

ไม่มีใน “th” แสดงเป็น อังกฤษ

ตำแหน่ง

กลุ่มฟังก์ชัน 2 Chassis › 54 Electrical system, equipment and instruments › 54.10 Battery, power supply, voltage converter — ซีรีส์ 118 (รุ่น 386, 686) · ซีรีส์ 177 (รุ่น 086, 186) · ซีรีส์ 247 (รุ่น 086, 786)

EinPAS 16 Fuel/power supply to engine › 16.20 High-voltage on-board electrical system › 16.20.30 Charger/charging cable/charging system — ซีรีส์ 118 (รุ่น 386, 686) · ซีรีส์ 177 (รุ่น 086, 186) · ซีรีส์ 247 (รุ่น 086, 786)

AP54.10-P-5458E

Check charging cable and vehicle socket

07.02.2020

Model

118.386/686, 177.086/186, 247.086/786

Check charging cable and vehicle socket

P54.10-A079-09

Shown on model 177.086, valid for model 118.386/686, 177.086/186, 247.086/786

1a

Charging cable

3

Cap

1b

Charging cable

4

Sequence

2

Charger feed-in socket

5

Locks

Danger

Risk of death when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC)

Do not touch damaged or defective live component parts and lines or non-insulated electrical connections and lines.

AS00.00-Z-0035-01A

Topical note

General information on vehicles with high-voltage on-board electrical system and/or lithium-ion battery and/or gaseous-fuel drive system as well as personal protective equipment

AH00.00-Z-0300-01A

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Remove

1

Take charging cables (1a) and (1b) out of the vehicle.

Check

2

Check entire length of charging cable (1a), plugs and switches for cracks, kinks, bites, cuts, crushed areas, chafe marks and other damage.

If problems are determined,

replace charging cable (1a).

After obtaining special order.

3

Check entire length of charging cable (1b), plugs and switches for cracks, kinks, bites, cuts, crushed areas, chafe marks and other damage.

If problems are determined,

replace charging cable (1b).

After obtaining special order.

Install

4

Place charging cables (1a) and (1b) in vehicle.

Check

5

Check charger feed socket (2) for damage.

If problems are determined,

Replace charger feed socket (2).

After obtaining special order.

6

Check that caps (3) are firmly seated on charger feed-in socket (2).

If problems are determined,

Replace charger feed socket (2).

After obtaining special order.

7

Check drain (4) for clear passage and soiling.


Remove any soiling.
This is because water must not collect in the charger feed socket (2) area.

If problems are determined,

rectify the problems.

After obtaining special order.

8

Check locks (5) by opening and closing caps (3).

If problems are determined,

Replace charger feed socket (2).

After obtaining special order.

เอกสารที่อ้างถึง