1.1 Check front interior illumination.
For vehicles without code (LD0) Dome lamp with reading lights for driver/front passenger
Procedure as for the following example for models 900, 906: The dome lamp with switch at the front is switched on by turning the switch to the left. When the switch is in the center position, the dome lamp is off. Turning the switch to the right causes the dome lamp to be switched on/off when a door is opened/closed.
On models 690.6, 901 up to 905 the test of the front interior illumination is conducted as for model 906
. The same applies for models 690.6, 901 up to 905 with different equipment variants than those shown in the example.
N54.21-2160-01
1.2 Check front interior illumination.
For vehicles with code (LD0) Dome lamp with reading lights for driver/front passenger
The left front dome lamp (3) and the right front dome lamp (4) are switched on and off by pressing the button (1). When the button (2) is pressed, the left front dome lamp (3) and the right front dome lamp (4) are switched on/off when a door is opened/closed.
Pressing the buttons (5, 6) switches the left front reading lamp (7) and the right front reading lamps (8) on/off.
N82.20-2263-01
2 Check rear interior illumination.
Procedure as for following example for model 900, 906:
The rear dome lamp is switched on by turning the switch (9) to the left (12). When the switch (9) is in the center position (10), the dome lamp is off. Turning the switch (9) to the right (11) causes the dome lamp to be switched on/off when a door is opened/closed.
For models 690.6, 901 up to 905 the test of the rear interior illumination is conducted as for model 906.
The same applies for models 690.6, 901 up to 905 with different equipment variants than those shown in the example.