AP49.00-T-4950B | Exhaust system - inspect for leaks and condition | 10.3.00 |
ENGINE 441.980 in MODEL 613.364 /365
T49.10-0012-11
Shown on model 613.365
T49.10-0013-01
Shown on model 613.365
1 | Remove the maintenance flap for engine in the interior | ||
2 | Open maintenance flap at rear right | ||
3 | Remove the side cover at the exhaust muffler | ||
| Check | ||
| Inspect condition | ||
4 | Inspect the exhaust system for external damage | ||
5 | Inspect condition and as-specified installation of the metal hoses, pipe clamps and hangers | ||
| Inspect for leaks | ||
Danger! | Risk of accident from vehicle starting off by itself when engine running. Risk of injury from contusions and burns if you insert your hands into the engine when it is started or when it is running | Secure vehicle to prevent it from moving off by itself. | |
6 | Start engine | Run engine at idling speed. | |
7 | Seal off the exhaust tail pipes | Use suitable aid (e.g. plugs, plate etc.) to seal off in order to produce the highest possible exhaust pressure. | |
8 | Inspect the exhaust system at the pipe and flange connections (arrows) for exhaust gas flowing out | Particularly at points close to sound proofing and insulation material. If leaks exist, replace the leaking parts of the exhaust system -subject to separate repair order. | |
9 | Switch off engine | ||
10 | Install engine compartment encapsulation | ||
11 | Remove the side cover at the exhaust muffler | ||
12 | Close maintenance flap at rear right |