AP46.00-P-4653GH | Checking tie rod and drag link joints for play and checking rubber boots | 3.5.00 |
MODEL 163.113 /128 /136 /154 /157 /172 /174 /175
P46.40-0213-01
1g Bellows
1h Inner clamping ring
1i Outer clamping ring
10 Tie rod
10i Lock nut
10l Tie rod end
P46.40-0212-01
1 | Ignition OFF | ||
| Checking | ||
2 | Check bellows (1g) by visual inspection as follows: - Jack up vehicle at front axle - Stretch bellows by turning the steering to the left and right while checking for damage (cracks, chafe marks and dents) | Never check the bellows (1g) by pushing in or bending the folds as this causes damage to the plastic and leads to leaks in the long term. If necessary: | |
| Replace bellows | ||
3 | Check tie rod (10) for play | Check tie rod joints by pulling and pushing firmly. If necessary: | |
| Replace track rods | ||
4 | Check rubber boot of outer joint for leaks and condition | If a rubber boot is leaking, replace tie rod joint. If necessary: | |
| Replace track rods |