ap4600p4651h

Check condition of steering and tie rods

ประเภท ap · หัวข้อ 46.00 · เวอร์ชัน 0100 · 2019-05-22

ใช้กับ: Model 293

ไม่มีใน “th” แสดงเป็น อังกฤษ

ตำแหน่ง

กลุ่มฟังก์ชัน 2 Chassis › 46 Steering › 46.00 General — ซีรีส์ 293

EinPAS 22 Steering › 22.15 Power steering › 22.15.5 Power steering assembly — ซีรีส์ 293

AP46.00-P-4651H

Check condition of steering and tie rods

14.03.2019

Model

293

Check condition of steering and tie rods

1

Tie rod joint boot

2

Tie rod joint

3

Tie rod end

4

Tie rod

P46.00-A003-06

Check condition of steering and tie rods

P46.00-A004-09

5

Bellows

7

Rack-and-pinion steering

6

Clamps

8

Electric power steering actuator motor

Warning

Risk of injury. Moving parts can pinch, crush or, in extreme cases even sever extremities.

No parts of the body or limbs should be within the operating area of mechanical components when moving components.

AS00.00-Z-0009-01A

Danger

Risk of death caused by vehicle slipping or toppling off of the lifting platform.

Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer.

AS00.00-Z-0010-01A

Preparatory activity

1

Unlock steering lock.

Remove

2

Remove engine compartment lining at rear.

AR61.20-P-1105EQ

Check

3

Check tie rod joint boots (1) on tie rod ends (3) for condition, leak tightness and correct seating.

If necessary, use commercially available devices/tools.
Swiveling inspection mirror with lighting, comparable to inspection mirror Hazet 1977-1

If problems occur,

rectify the problems.

After obtaining special order.

4

Check tie rod joints (2) for play by firmly pulling and pushing the tie rod ends (3).

If problems occur,

rectify the problems.

After obtaining special order.

5

Check tie rod ends (3) and tie rods (4) for firm connection by pulling and pushing each one.

If problems occur,

rectify the problems.

After obtaining special order.

6

Check each inner tie rod joint for play by firmly pulling and pushing on tie rods (4) in direction of rack-and-pinion steering (7).

If problems occur,

rectify the problems.

After obtaining special order.

7

Stretch boots (5) by turning steering all the way to right and left, and check for cracks, indentations and chafe marks.


Do not check the boots (5) by pressing in or around the raised bead.
Otherwise, the material may be damaged, leading to leakage with consequential damage.

If necessary, use commercially available devices/tools.
Swiveling inspection mirror with lighting, comparable to inspection mirror Hazet 1977-1

If problems occur,

rectify the problems.

After obtaining special order.

8

Check clamps (6) are firmly and correctly seated.


Clamps (6) may not be damaged, loose or incorrectly seated.
Otherwise this may lead to leakage with consequential damage.

If necessary, use commercially available devices/tools.
Swiveling inspection mirror with lighting, comparable to inspection mirror Hazet 1977-1

If problems occur,

rectify the problems.

After obtaining special order.

9

Check rack-and-pinion steering (7).

If necessary, use commercially available devices/tools.
Swiveling inspection mirror with lighting, comparable to inspection mirror Hazet 1977-1

If problems occur,

Replace steering for safety reasons.

After obtaining special order.

10

Check electric power steering actuator motor (8).

If necessary, use commercially available devices/tools.
Swiveling inspection mirror with lighting, comparable to inspection mirror Hazet 1977-1

If problems occur,

Replace steering for safety reasons.

After obtaining special order.

Install

11

Install rear engine compartment lining.

AR61.20-P-1105EQ

เอกสารที่อ้างถึง