Compressed air drier - replacing granulate cartridges

AP42.60-T-4381CA

Compressed air drier - replacing granulate cartridges

22.5.02



The compressed air drier is located in the underbody in front of the rear axle.



Remove

1.1

Bleed compressed air drier (1) by filling compressed-air system.

 Fill the compressed-air system until the pressure regulator cuts out.

1.2

Bleed compressed air drier (1) by releasing compressed air.

 Disconnect the line at connection "1" on the compressed air drier, release the compressed air, then reconnect the line.

2

Detach granulate cartridge (2).

 Removed granulate cartridges fall into the category of special waste due to the oil residues they contain, and must be treated the same as oil filters.



*655589006100

 Strap wrench (alternative)

*WH58.30-Z-1075-06A

3

Detach noise muffler and clean.



Install

4

Lightly grease thread and sealing ring on new granulate cartridge.

 Use new sealing ring.

*BR00.45-Z-1014-06A

5

Install granulate cartridge (2).



 First screw on granulate cartridge by hand until sealing ring touches housing.

*BA42.60-N-1001-01B

6

Install noise muffler (3).



Testing

7

Pressurize compressed air drier (1) and check for leaks.

 The pressure regulator must cut in to pressurize the compressed air drier.

8

Enter replacement of the granulate cartridge (2) in the maintenance booklet.

Number

Designation

Model
613.367/368

BA42.60-N-1001-01B

Granulate cartridge to air drier

Nm

15

Number

Designation

WH58.30-Z-1075-06A

Offset screwdriver

Number

Designation

Order number

BR00.45-Z-1014-06A

ATE grease

-