P42.20-2103-06
Shows model 203
1 Cover
85, 86 Parking brake cables
89 Nut
| Remove/install | ||
Danger! | Risk of death caused by vehicle slipping or toppling off of the vehicle lift. | Align vehicle between vehicle lift columns and position four support plates at vehicle lift support points specified by vehicle manufacturer. | |
| Checking | ||
1 | Check pedal travel of parking brake pedal | When foot-operated with a force of 170 N, the parking brake must not depress by more than 5 notches, otherwise perform steps 2 to 6. | |
2.1 | Fold over rear seat cushion | Vehicles without code P98 Black Series | |
| Model 203.2/7/0, 209.3 with code 287 Through-loading feature | ||
2.2 | Remove rear seat cushion | Vehicles without code P98 Black Series | |
| Model 203.0 without code 287 Through-loading feature | ||
2.3 | Remove battery | Model 209 with code P98 Black Series | |
| Remove/install battery | ||
3 | Remove cover (1) | ||
4 | Correct lengthening of parking brake cables (85, 86) | Tighten nut (89) two turns and recheck parking brake pedal travel. If necessary, tighten the nut (89) further until the parking brake pedal can be depressed by maximum 5 notches when foot-operated with a force of 170 N. | |
5 | Hoist vehicle with vehicle lift until wheels are free | ||
| Checking | ||
6 | Check unobstructed movement of rear wheels | It must be possible to turn the wheels completely freely by hand. | |
7 | Install in the reverse order |