AP42.10-T-4253C | Check brake lining thickness | 23.1.06 |
MODEL 613.364 /365
with HOSE rear axle for O560,
with VOSE front axle for O560
T42.10-0016-11
Disk brake
1 Brake pads
A Brake pad thickness
T42.10-0017-11
Drum brake
2 Plug
Modification notes
| Checking | ||
| Check the brake lining thickness on all wheel brakes | ||
DISK BRAKE | |||
1 | Remove front wheels. | ||
2 | Measure thickness (A) of brake pads (1) | Service limit of brake pad, normal or overdimension | |
3 | Install front wheels | | |
4 | Enter the brake pad thickness of the individual wheel brakes in the maintenance sheet | ||
| DRUM BRAKE | ||
5 | Remove plugs (2) in inspection holes of brake carrier plates | ||
6 | Check the lining thickness of the primary brake shoes and secondary brake shoes | The service limit of the brake linings is identified by a stepped edge. | |
7 | Seal the inspection holes with stop | ||
8 | Enter the remaining brake lining thickness of the individual wheels brakes in the maintenance sheet | ||
9 | Check position of brake camshafts |
Test values for brake pad, brake caliper
Number | Designation | Model 613.355/ 364/365/ | ||
BE42.10-N-1001-11C | Brake shoe thickness | Normal | mm | 28,0 |
mm | 10,0 | |||
Oversize | mm | 30,0 | ||
mm | 12,0 | |||
Disk wheels