AP42.10-T-4253A | Check brake lining thickness | 7.7.05 |
MODEL NMB671 with FRONT AXLE 733.406 with REAR AXLE 748.513 /524 /12 /134 /135
T42.10-0009-01
1 Plug
2 Stepped edge
| Check | ||
1 | Remove plugs (1) in inspection holes of brake carrier plates | ||
2 | Check lining thickness of primary and secondary brake shoes | The service limit of the brake linings is identified by a stepped edge (2). | |
3 | Seal inspection holes wit the stop plug (1) | ||
4 | Enter the remaining brake lining thickness of the individual wheel brakes in the operation booklet and maintenance sheet | ||
5 | Check position of brake camshafts |
Test and adjustment values for brake shoes
Number | Designation | Model 671 with | Model 671 | Model 671 | ||
BE42.10-N-1001-13D | Thickness of brake linings | Regular (A) | mm | 18,7...19,0 | 18,7...19,0 | 18,7...19,0 |
Repair size I | mm | 19,5...19,8 | 19,5...19,8 | 19,5...19,8 | ||
Repair size II | mm | 20,2...20,5 | 20,2...20,5 | 20,2...20,5 | ||
Minimum lining thickness (B) | mm | 5 | 5 | 5 | ||
See picture in | - | |||||