ap4210s4210a

Brake system - inspect fluid level

ประเภท ap · หัวข้อ 42.10 · เวอร์ชัน 0100 · 2013-12-03

ใช้กับ: MODEL 636, 638, 639

ไม่มีใน “th” แสดงเป็น อังกฤษ

ตำแหน่ง

กลุ่มฟังก์ชัน 2 Chassis › 42 Brakes - hydraulic and mechanical systems › 42.10 Service brake — ซีรีส์ 636 · ซีรีส์ 638 · ซีรีส์ 639

EinPAS 21 Brakes/vacuum system/compressed-air system › 21.15 Service brake/vacuum system › 21.15.5 Brake system, complete — ซีรีส์ 636 · ซีรีส์ 638 · ซีรีส์ 639

AP42.10-S-4210A

Brake system - inspect fluid level

29.11.2013

MODEL

636, 638, 639

Brake system - inspect fluid level

N42.50-2307-01

Check

Danger !

Risk of poisoning from swallowing brake fluid. Risk of injury from skin and eye contact with brake fluid

Only pour brake fluid into suitable and appropriately marked containers. Wear protective clothing and eye protection when handling brake fluid.

AS42.50-Z-0001-01A

Notes on repairs to brake system

AH42.00-P-0003-01A

Brake fluid notes

AH42.50-P-0001-01A

1

Check brake fluid level in brake fluid reservoir (1)

Brake fluids (DOT 4 plus)

BB00.40-P-0331-00A

The fluid level must be between the "MIN" and "MAX" markings on the brake fluid reservoir (1).
In the event of a brake fluid level which has dropped due to brake lining wear only refill with brake fluid if the brake fluid level is below the "Min" mark.

If the fluid level is too low:

Determine and rectify cause, subject to separate repair order.

If the fluid level is too high:

Extract brake fluid until the fluid level is at the "MAX" mark.

เอกสารที่อ้างถึง