P42.00-A002-09
Shown on model 204 |
1 | Side underfloor paneling | 3 | Bolts | |
2 | Nuts |
P42.00-A001-09
Shown on model 204 |
1 | Side underfloor paneling | 4 | Brake lines |
P42.00-A003-09
Shown on model 204 |
1 | Side underfloor paneling | 4 | Brake lines |
P42.00-A000-09
Shown on model 204 |
1 | Side underfloor paneling | 4 | Brake lines |
Danger | Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer. | |
Notes on inspecting corrosion on brake lines | |||
Preparatory activity | |||
1 | Lift vehicle with lifting platform. | ||
| |||
| Remove | ||
2 | Remove bolts (3) and nuts (2) and release side underfloor paneling. | ||
3 | Fold side underfloor paneling (1) downwards. | ||
| Check | ||
4 | Check brake lines (4) and holder in field of vision. | If necessary, use commercially available devices/tools. | |
If the brake lines (4) are not damaged or corroded, | |||
| |||
brake lines (4) are OK, continue with operation step 5. | |||
If the brake lines (4) are damaged or corroded, | |||
| |||
rectify problems, in accordance with the country-specific regulations for mobility and body shell complaints. | |||
After obtaining special order. | |||
| Install | ||
5 | Fold side underfloor paneling (1) upwards and tighten bolts (3) and nuts (2). | ||
Preparatory activity | |||
6 | Lower vehicle with vehicle lift. | ||
|