AP42.10-A-4253A | Check brake lining thickness | 21.3.01 |
MODELS NAB372.124 with FRONT AXLE 733.015 /201 with REAR AXLE 745.800
MODELS NAB372.317 with FRONT AXLE 733.015 with REAR AXLE 745.800
N42.10-0529-01
4 Plug
| Check | ||
1 | Remove stop plugs (4) on the inspection holes of the brake support plate | In each case there is a stop plug (4) for the primary brake shoe and secondary brake shoe. | |
2 | Check brake lining thickness of the primary brake shoe and secondary brake shoe | The service limit of the primary brake shoe and secondary brake shoe is marked by stepped edge (arrow). If the service limit is reached, the primary brake shoe and secondary brake shoe should be replaced subject to separate repair order: | |
| Removing and installing brake shoes | ||
3 | Seal the inspection holes in the brake support plate with the stop plugs (4) | ||
4 | Carry out work steps 1 to 3 in sequence on all wheel brakes |