Tightening sequence |
P40.10-4968-01
Interchange wheel-and-tire assemblies (vehicles without mixed tires) |
P40.10-0334-01
Danger | Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer. | |
Topical note | Limited maximum speed for winter tires with speed index V | ||
Topical note | Information on tires / rims | ||
Preparatory activity | |||
1 | Lift vehicle with lifting platform. | ||
| |||
| Remove | ||
2 | Remove hub caps. | Vehicle with hubcaps. | |
3 | Remove wheel bolts or wheel nuts and remove wheel and tire assemblies using wheel lift dolly. | ||
| Check | ||
4 | Check tires for damage and condition. | ||
If problems occur, | |||
| |||
rectify the problems. | |||
After obtaining special order. | |||
| Install | ||
5 | Clean and check components of wheel threaded connections, and protect against corrosion. | ||
| |||
Paste, hot lubrication 1 kg, DBL 6879.20 | |||
6 | Swap over wheel and tire assemblies on front and rear axle. | If necessary and only on vehicle without mixed tires. | |
| |||
If the wheel and tire assemblies are to be interchanged, | |||
| |||
change them around. | |||
After obtaining special order. | |||
7 | Mount wheel and tire assemblies using wheel lift dolly and tighten wheel bolts or wheel nuts. | | |
Wheel bolt for steel rim | |||
Wheel bolt for light alloy wheel | |||
Wheel nut for steel rim | |||
Wheel nut, light alloy wheel | |||
Wheel nut, two-piece light alloy wheel | |||
Wheel nut, spare wheel to spare wheel carrier | |||
8 | Lower vehicle with vehicle lift. | ||
| |||
9 | Correct tire pressure of tires on front and rear axle. | ||
If unusual tire pressure loss occurs, | |||
| |||
determine cause and correct. | |||
After obtaining special order. | |||
10 | Install hub caps. | Vehicle with hubcaps. | |
| |||
11 | Activate tire pressure monitor. | Model 461, 463 | |
| Model 463 |