P35.20-2341-09
1 | Rear axle elastomer bearing | 4 | Clamps for outer propeller shaft boots | |
2 | Front engine stabilizer mount elastomer bearing | 5 | Outer propeller shaft boot | |
3 | Rear engine stabilizer mount elastomer bearing | 6 | Rear shock absorber elastomer bearing |
P35.20-2346-09
7 | Inner propeller shaft boots | 9 | Inner tie rod elastomer bearing | |
8 | Clamps for inner propeller shaft boots | 10 | Outer tie rod elastomer bearing |
Danger ! | Risk of injury. Moving parts can pinch, crush or, in extreme cases even sever extremities. | No parts of the body or limbs should be within the operating range of the mechanism when moving components. | |
Danger ! | Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer. | |
Preparatory tasks | |||
1 | Release parking brake | ||
2 | Lift vehicle on vehicle lift | ||
| Check | ||
3 | Check wheel bearing by firmly pulling, pushing and turning the wheels | If there are problems: | |
| |||
Repair the problem, subject to separate repair order. | |||
4 | Check rear axle carrier for cracks, deformation and corrosion | If there are problems: | |
| |||
Repair the problem, subject to separate repair order. | |||
5 | Check rear axle elastomer bearing (1) for cracks, deformation and wear and check for play by firmly tugging and pushing | If there are problems: | |
| |||
Repair the problem, subject to separate repair order. | |||
6 | Check front engine stabilizer mount elastomer bearing (2) for cracks, deformation and wear and check for play by firmly tugging and pushing | If there are problems: | |
| |||
Repair the problem, subject to separate repair order. | |||
7 | Check rear engine stabilizer mount elastomer bearing (3) for cracks, deformation and wear and check for play by firmly tugging and pushing | If there are problems: | |
| |||
Repair the problem, subject to separate repair order. | |||
8 | Check clamps for outer propeller shaft boots (4) for condition and that they are correctly seated. | If there are problems: | |
| |||
Repair the problem, subject to separate repair order. | |||
9 | Check outer propeller shaft boots (5) for condition, leaktightness and correct seating | If there are problems: | |
| |||
Repair the problem, subject to separate repair order. | |||
10 | Check rear shock absorber elastomer bearing (6) for cracks, deformation and wear, and check for play by firmly tugging and pushing | If there are problems: | |
| |||
Repair the problem, subject to separate repair order. | |||
11 | Check clamps for inner propeller shaft boots (8) for condition and that they are correctly seated. | If there are problems: | |
| |||
Repair the problem, subject to separate repair order. | |||
12 | Check inner propeller shaft boots (7) for condition, leaktightness and correct seating | If there are problems: | |
| |||
Repair the problem, subject to separate repair order. | |||
13 | Check inner tie rod elastomer bearing (9) for cracks, deformation and wear, and check for play by firmly tugging and pushing | If there are problems: | |
| |||
Repair the problem, subject to separate repair order. | |||
14 | Check outer tie rod elastomer bearing (10) for cracks, deformation and wear, and check for play by firmly tugging and pushing | If there are problems: | |
| |||
Repair the problem, subject to separate repair order. | |||
Finishing activity | |||
15 | Lower vehicle with lifting platform |