Shown on model 205 |
1 | Side strut rod |
2 | Side strut rod elastomer bearing |
3 | Upper strut rod |
4 | Upper strut rod elastomer bearing |
5 | Stabilizer bar |
5a | Stabilizer bar bushing |
6 | Shift rail |
7 | Shift rail elastomer bearing |
P35.20-2331-12
P35.20-2332-09
Shown on model 205 |
8 | Rear axle carrier elastomer bearing | 13 | Spring control arm | |
9 | Spring control arm elastomer bearing | 14 | Elastomer bearing for supporting ball joint | |
10 | Rear axle carrier | 15 | Elastomer bearing for control arm | |
11 | Rear axle differential elastomer bearing | 15a | Control arm | |
12 | Rear axle shafts | 16 | Supporting link |
P35.20-2348-09
Shown on model 205 |
17 | Outer axle shaft boot | 19 | Clamps | |
18 | Inner axle shaft boot |
Warning | Risk of injury. Moving parts can pinch, crush or, in extreme cases even sever extremities. | No parts of the body or limbs should be within the operating area of mechanical components when moving components. | |
Danger | Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer. | |
Preparatory activity | |||
1 | Release parking brake. | ||
2 | Lift vehicle with lifting platform. | ||
| |||
| Check | ||
3 | Assess the wheel bearings by firmly tugging, pushing and turning at the wheels. | If problems occur, | |
| |||
Rectify problems. | |||
After obtaining special order. | |||
4 | Check side strut rods (1) for cracks, deformation and corrosion. | If problems occur, | |
| |||
Rectify problems. | |||
After obtaining special order. | |||
5 | Check side strut rod elastomer bearings (2) for cracks, deformation and wear as well as for play by firmly pulling and pushing. | If problems occur, | |
| |||
Rectify problems. | |||
After obtaining special order. | |||
6 | Check upper strut rods (3) for cracks, deformation and corrosion. | If problems occur, | |
| |||
Rectify problems. | |||
After obtaining special order. | |||
7 | Check upper strut rod elastomer bearings (4) for cracks, deformation and wear as well as for play by firmly pulling and pressing. | If problems occur, | |
| |||
Rectify problems. | |||
After obtaining special order. | |||
8 | Check stabilizer bar (5) for cracks, deformation and corrosion. | If problems occur, | |
| |||
Rectify problems. | |||
After obtaining special order. | |||
9 | Check stabilizer bar bushings (5a) for cracks, deformation and wear as well as for play by firmly pulling and pressing. | If problems occur, | |
| |||
Rectify problems. | |||
After obtaining special order. | |||
10 | Check shift rails (6) for cracks, deformation and corrosion. | If problems occur, | |
| |||
Rectify problems. | |||
After obtaining special order. | |||
11 | Check shift rail elastomer bearings (7) for cracks, deformation and wear as well as for play by firmly pulling and pressing. | If problems occur, | |
| |||
Rectify problems. | |||
After obtaining special order. | |||
12 | Check spring links (13) for cracks, deformation and corrosion. | If problems occur, | |
| |||
Rectify problems. | |||
After obtaining special order. | |||
13 | Check spring link elastomer bearings (9) for cracks, deformation and wear as well as for play by firmly pulling and pushing. | If problems occur, | |
| |||
Rectify problems. | |||
After obtaining special order. | |||
14 | Check supporting links (16) for cracks, deformation and corrosion. | If problems occur, | |
| |||
Rectify problems. | |||
After obtaining special order. | |||
15 | Check supporting link elastomer bearings (14) for cracks, deformation and wear as well as for play by firmly pulling and pressing. | If problems occur, | |
| |||
Rectify problems. | |||
After obtaining special order. | |||
16 | Check control arms (15a) for cracks, deformation and corrosion. | If problems occur, | |
| |||
Rectify problems. | |||
After obtaining special order. | |||
17 | Check control arm elastomer bearings (15) for cracks, deformation and wear as well as for play by firmly pulling and pressing. | If problems occur, | |
| |||
Rectify problems. | |||
After obtaining special order. | |||
18 | Check rear axle carrier (10) for cracks, deformation and corrosion. | If problems occur, | |
| |||
Rectify problems. | |||
After obtaining special order. | |||
19 | Check rear axle carrier elastomer bearings (8) for cracks, deformation and wear. | If problems occur, | |
| |||
Rectify problems. | |||
After obtaining special order. | |||
20 | Check rear axle differential elastomer bearings (11) for cracks, deformation and wear. | If problems occur, | |
| |||
Rectify problems. | |||
After obtaining special order. | |||
21 | Check condition of rear axle shafts (12). | If problems occur, | |
| |||
Rectify problems. | |||
After obtaining special order. | |||
22 | Check outer drive shaft boots (17) for condition, leaktightness and correct seating. | If problems occur, | |
| |||
Rectify problems. | |||
After obtaining special order. | |||
23 | Check inner drive shaft boots (18) for condition, leaktightness and correct seating. | If problems occur, | |
| |||
Rectify problems. | |||
After obtaining special order. | |||
24 | Check condition and seating of clamps (19). | If problems occur, | |
| |||
Rectify problems. | |||
After obtaining special order. | |||
Finishing activity | |||
25 | Lower vehicle with vehicle lift. | ||
|