G35.25-3124-01
G35.25-3122-01
G35.25-3182-71
Shown on hub reduction gear of rear axle 747.220/221 |
1 | Filling screws |
Shown on hub reduction gear of rear axle 747.365/366 |
1 | Filling screws |
Shown on hub reduction gear of rear axle 747.367/368 |
1 | Filling screw |
Rear axle differential |
3 | Filling screw |
G35.30-3135-01
Caution | Risk of injury to skin and eyes due to handling of transmission oil. Health risk caused by swallowing transmission oil | Wear protective gloves, protective clothing and safety glasses. | |
| Check | ||
1 | Secure vehicle against rolling | The vehicle should be parked on a level, horizontal surface. | |
2 | Clean area around filling screws (1, 3) | ||
3 | Unscrew filling screw (3) from differential and check oil level | The oil level is correct when the oil is at the bottom edge of the filler opening. | |
Axle drive (synthetic oil) | |||
If the oil level is incorrect. | |||
| |||
Correct oil level. | |||
4 | Screw filling screw (3) into differential | Filling screw to differential | |
5 | Check the outside and inside of the wheel hubs for leaks | Small areas displaying a limited amount of seepage are not a cause for concern. | |
If leaks are severe with constant oil loss | |||
| |||
Eliminate the oil loss immediately, subject to separate repair order. | |||
6 | Unscrew filling screw at displacement transmission | Rear axle 747.470 | |
7 | Check oil level in displacement transmission | Rear axle 747.470 | |
The oil level is correct when the oil is at the bottom edge of the filler opening. Correct the oil level as indicated. | |||
Displacement transmission (synthetic oil) | |||
8 | Screw in filling screw at displacement transmission | Rear axle 747.470 | |
Filling screw to displacement transmission | |||
9 | Remove filling screw (1) from hub reduction gear housing and check oil level | The oil level is correct if the oil is max. 10 mm below the filler opening. | |
Hub reduction gear (synthetic oil) | |||
If the oil level is incorrect. | |||
| |||
Correct oil level. | |||
10 | Screw in filler screw (1) | Filling screw to hub reduction gear |