ap3310p3358s

Check condition of front axle and front axle ball joints

ประเภท ap · หัวข้อ 33.10 · เวอร์ชัน 0100 · 2014-10-06

ใช้กับ: MODEL 453

ไม่มีใน “th” แสดงเป็น อังกฤษ

ตำแหน่ง

กลุ่มฟังก์ชัน 2 Chassis › 33 Front axle › 33.10 Complete front axle — ซีรีส์ 453

EinPAS 17 Drivetrain/axle › 17.50 Front axle › 17.50.30 Front axle assembly — ซีรีส์ 453

AP33.10-P-3358S

Check condition of front axle and front axle ball joints

12.08.2014

MODEL

453

Check condition of front axle and front axle ball joints

Shown on MODEL 453 with removed underfloor paneling

1

Stabilizer bar mounting

2

Triangular control arm

3

Elastomer bearing

4

Elastomer bearing

5

Supporting joint boot

6

Supporting joint

P33.10-2439-06

Check condition of front axle and front axle ball joints

Shown on MODEL 453 with removed underfloor paneling

7

Shift rail

8

Shift rail joint

9

Shift rail joint sleeve

P33.10-2438-06

Danger !

Risk of injury. Moving parts can pinch, crush or, in extreme cases even sever extremities.

No parts of the body or limbs should be within the operating range of the mechanism when moving components.

AS00.00-Z-0009-01A

Danger !

Risk of death caused by vehicle slipping or toppling off of the lifting platform.

Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer.

AS00.00-Z-0010-01A

Preparatory activity

1

Lift vehicle on vehicle lift

Check

2

Check underfloor paneling for evidence of driving over obstacles or damage caused by contact with the vehicle underside

If the underfloor paneling is damaged:

Remove underfloor paneling and check front axle carrier for damage, subject to separate repair order.

3

Check wheel bearing by firmly pulling, pushing and turning the wheels

If there are problems:

Repair the problem, subject to separate repair order.

4

Check front axle carrier for cracks, deformation and corrosion

If there are problems:

Repair the problem, subject to separate repair order.

5

Check stabilizer bar bushing (1) for cracks, deformation and wear, and check for play by firmly tugging and pushing

If there are problems:

Repair the problem, subject to separate repair order.

6

Check elastomer bearings (3, 4) of wishbone control arms (2) for cracks, deformation and wear and for play by firmly tugging and pushing

If there are problems:

Repair the problem, subject to separate repair order.

7

Check supporting joint boots (5) for proper condition, leaktightness and correct seating

If there are problems:

Repair the problem, subject to separate repair order.

8

Check play on supporting joints (6) by pulling and pressing firmly

If there are problems:

Repair the problem, subject to separate repair order.

9

Check coupling rod joint sleeves (9) for proper condition, leaktightness and correct seating

If there are problems:

Repair the problem, subject to separate repair order.

10

Check coupling rod joints (8) for play by firmly tugging and pushing coupling rods (7)

If there are problems:

Repair the problem, subject to separate repair order.

Finishing activity

11

Lower vehicle

เอกสารที่อ้างถึง