G33.00-3112-07
1 | Filling screw | 2 | Drain screw |
Danger | Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer. | |
Caution | Risk of injury to skin and eyes due to handling of transmission oil. Health risk caused by swallowing transmission oil | Wear protective gloves, protective clothing and safety glasses. | |
Topical note | Special instructions for lifting and supporting vehicle | ||
Drain off | |||
1 | Lift vehicle with lifting platform. | ||
| |||
2 | Remove lower center engine compartment lining. | ||
| |||
3 | Clean area around the filler screw (1) and drain screw (2). | ||
4 | Remove filling screw (1). | ||
5 | Unscrew drain screw (2) and completely drain off transmission oil. | To do so, place a suitable receptacle under the drain screw (2). | |
6 | Screw in drain screw (2). | Replace the sealing ring and make sure that it is seated correctly. Apply light coating of oil to thread. | |
Drain screw | |||
Pour in | |||
7 | Fill transmission with oil. | | |
Do not add up to lower edge of filler opening. | |||
Front axle (synthetic oil) | |||
8 | Screw in filling screw (1). | Replace the sealing ring and make sure that it is seated correctly. Apply light coating of oil to thread. | |
Oil filler plug | |||
9 | Mount lower center engine compartment lining. | ||
| |||
Attach center lower engine compartment lining only after completion of all maintenance operations. | |||
10 | Lower vehicle with vehicle lift. | ||
11 | Confirm conducted operations in maintenance booklet or in Digital Service Booklet (DSB). |