Remove suspension travel limiter

AP32.25-P-3270B

Remove suspension travel limiter

05.07.2019

Model

253.99

1

Dust boot

3

Spring retainer

5

Front axle suspension travel limiter

1

Dust boot

3

Spring retainer

4

Rear axle suspension travel limiter

2

Cover

9

Fuse

6

Inside rearview mirror

7

Speed specification

 Warning

Risk of injury. Moving parts can pinch, crush or, in extreme cases even sever extremities.

No parts of the body or limbs should be within the operating area of mechanical components when moving components.

AS00.00-Z-0009-01A

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A



Remove

1

Lift vehicle with lifting platform.



AR00.60-P-1006A

2

Remove front axle suspension travel limiter (5) between dust boots (1) and spring retainers (3).


It must be ensured that all 4 installed front axle suspension travel limiters (5) at each damper are removed.
Otherwise the suspension may be damaged.

3

Remove rear axle suspension travel limiter (4) between dust boots (1) and spring retainers (3).


It must be ensured that all 5 installed rear axle suspension travel limiters (4) at each damper are removed.
Otherwise the suspension may be damaged.

4

Lower vehicle completely with vehicle lift.



AR00.60-P-1006A



Install

5

Open tailgate.

6

Fold up trim (2).

7

Install retainer (9).

8

Fold down trim (2).

9

Close liftgate.

Read out the fault memory

10

Switch electronic ignition lock control unit to position "2" (circuit 15).

11

Connect diagnostic device and read out and delete fault memory.



AD00.00-P-2000-04B

12

Switch electronic ignition lock control unit to position "0".



Remove

13

Remove speed specification (7) from inside rearview mirror (6).