AP29.00-P-2981G | Clutch actuation - replacing brake fluid | 5.7.96 |
MODEL 460
MODEL 461.219 /223 /227 /229 /238 /239 /249 /266 /267 /323 /328 /329 /337 /338 /341 /367 /368 /401 /402 /403 /404 /405 /450 /451 /452 /454 /455 /456 /458 /459
MODEL 463.200 /204 /207 /220 /221 /224 /225 /227 /228 /304 /307 /324 /325 /327 /328
P29.00-0241-06
1 Reservoir
2 Clutch cylinder bleed valve
| Remove/Install | ||
Danger! | Risk of poisoning from swallowing brake fluid. Risk of injury from skin and eye contact with brake fluid. | Pour brake fluid only into suitable and appropriately marked containers. Wear protective clothing and eye protection when handling brake fluid. | |
| Notes on brake fluid | All models | |
1 | Unscrew cap of reservoir (1) and extract old brake fluid with a syringe | ||
2 | Screw connector of bleeding device onto reservoir and fit on pressure hose | ||
3 | Set working pressure of bleeding device as specified by manufacturer | ||
4 | Remove dust cap at bleed valve (2) of clutch cylinder and fit hose of collecting vessel onto the bleed valve | ||
5 | Open bleed valve and leave open long enough until fresh brake fluid flows out free of bubbles | ||
6 | Close bleed valve, take off hose and press on dust cap | ||
7 | Detach pressure hose of bleeding device at reservoir and unscrew connector | ||
8 | Fill reservoir up to "maximum" marking and screw on cap |