ap2800p2810ga

Transfer case - check and correct oil level

ประเภท ap · หัวข้อ 28.00 · เวอร์ชัน 0102 · 2019-03-13

ใช้กับ: Model 463 with transmission 725.0 as of model year 2019

ไม่มีใน “th” แสดงเป็น อังกฤษ

ตำแหน่ง

กลุ่มฟังก์ชัน 2 Chassis › 28 Transfer case › 28.00 General — ซีรีส์ 463

EinPAS 17 Drivetrain/axle › 17.22 Transfer case › 17.22.80 Transfer case, complete — ซีรีส์ 463

ใช้กับเครื่องยนต์/เกียร์ด้วย: 725 0**

AP28.00-P-2810GA

Transfer case - check and correct oil level

05.03.2019

Model

463 with transmission 725.0

as of model year 2019

Transfer case - check and correct oil level

Shown on model 463.349

1

Transfer case

3

Filling screw

P28.00-A006-12

Warning

Risk of injury. Skin or eye injuries may result when handling hot or glowing objects.

Wear protective gloves, protective clothing and safety glasses, if necessary.

AS00.00-Z-0002-01A

Danger

Risk of death caused by vehicle slipping or toppling off of the lifting platform.

Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer.

AS00.00-Z-0010-01A

Caution

Risk of injury to skin and eyes due to handling of transmission oil. Health risk caused by swallowing transmission oil

Wear protective gloves, protective clothing and safety glasses.
Do not pour transmission oil into beverage bottles.

AS00.40-Z-0001-01A

Preparatory activity

1

Lift vehicle with lifting platform.

AR00.60-P-1006A


Vehicle must be horizontal.
Otherwise, the transfer case is not correctly filled and an incorrect oil filling capacity can lead to fluid loss and property damage.

Clean

2

Clean area around filling screw (3).

Remove

3

Remove filling screw (3).

Check

4

Check oil level.

If transfer case (1) is filled up to lower edge of threaded hole of filling screw (3),

Oil level OK.

If transfer case (1) is not filled up to lower edge of threaded hole of filling screw (3),

Oil level not OK. correct the oil level.


AP28.00-P-2801GA

After obtaining special order.

Clean

5

Clean threaded hole of filling screw (3) in transfer case.

Loctite 7063 cleaning spray (150 ml)

*BR00.45-Z-1046-04A

Install

6

Tighten new filling screw (3) on transfer case (1).


Replace filling screw (3) each time it is removed.
Otherwise, this may lead to fluid loss and consequential damage.

Drain screw to transmission housing

*BA28.40-P-1001-01A

Finishing activity

7

Lower vehicle with vehicle lift.

AR00.60-P-1006A

Transfer case housing

Number

Designation

Model 463
as of model year 2019

BA28.40-P-1001-01A

Drain screw to transmission housing

Nm

14

Repair materials

Number

Designation

Order number

BR00.45-Z-1046-04A

Loctite 7063 cleaning spray (150 ml)

A 001 986 71 71 10

เอกสารที่อ้างถึง