ap2700p2702ga

Automatic transmission fluid and oil filter change

ประเภท ap · หัวข้อ 27.00 · เวอร์ชัน 0101 · 2019-09-27

ใช้กับ: Transmission 725.0 in model 463 as of model year 2019

ไม่มีใน “th” แสดงเป็น อังกฤษ

ตำแหน่ง

กลุ่มฟังก์ชัน 2 Chassis › 27 Automatic transmission › 27.00 General — ซีรีส์ 463

EinPAS 17 Drivetrain/axle › 17.20 Transmission › 17.20.80 Transmission, complete — ซีรีส์ 463

ใช้กับเครื่องยนต์/เกียร์ด้วย: 725 0**

AP27.00-P-2702GA

Automatic transmission fluid and oil filter change

24.09.2019

Transmission

725.0 in model 463

as of model year 2019

Automatic transmission fluid and oil filter change

P27.00-A001-09

Shown on transmission 725.0 in model 463.349

4e

Plug

6

Plug

5

Drain screw

Warning

Risk of injury. Skin or eye injuries may result when handling hot or glowing objects.

Wear protective gloves, protective clothing and safety glasses, if necessary.

AS00.00-Z-0002-01A

Danger

Risk of death caused by vehicle slipping or toppling off of the lifting platform.

Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer.

AS00.00-Z-0010-01A

Caution

Risk of injury to skin and eyes due to handling of transmission oil. Health risk caused by swallowing transmission oil

Wear protective gloves, protective clothing and safety glasses.
Do not pour transmission oil into beverage bottles.

AS00.40-Z-0001-01A

Notes on automatic transmission

AH27.19-P-0001-01NKB

Remove

1

Remove center engine compartment lining.

AR61.20-P-1105XG

2

Remove stop plug (4e).

3

Remove stop plug (6).

If the torque converter cannot be turned via the drain opening of the stop plug (4e).

4

Turn torque converter in direction of engine rotation until drain screw (5) appears in drain opening of stop plug (4e).

Commercially available devices/tools.
Flat tip screwdriver.
Depending on accessibility and version of the slot screwdriver.
Slot blade approx. 1.2 x 6.5 mm.
or
Slot blade approx. 1.2 x 8 mm.

Draining

5

Remove drain screw (5) and drain transmission oil from torque converter.


Collect the drained transmission oil in a suitable container in order to measure the oil filling quantity.
Damage can otherwise occur.


Dispose of old drain screw (5) and do not reuse it.
Otherwise, this may lead to fluid loss and consequential damage.

Remove

6

Remove automatic transmission oil pan with automatic transmission oil filters.

AR27.10-P-7031XG


Dispose of the old automatic transmission oil pan with the automatic transmission oil filters and do not use again.
Otherwise, this may lead to fluid loss and consequential damage.

Install

7

Install new automatic transmission oil pan with automatic transmission oil filters.

AR27.10-P-7031XG

8

Tighten new drain screw (5).

Drain screw to torque converter

*BA27.20-P-1002-01D

Clean

9

Clean torque converter and transmission bell housing in area of drain opening.

Install

10

Install stop plug (4e).

11

Install stop plug (6).

If stop plug (6) was removed beforehand.

Filling

12

Fill automatic transmission with oil.

AR27.00-P-0270EWN

Install

13

Install center engine compartment lining.

AR61.20-P-1105XG

Torque converter

Number

Designation

Transmission 725.0

BA27.20-P-1002-01D

Drain screw to torque converter

Nm

10

เอกสารที่อ้างถึง