AP26.00-P-2601G | Manual transmission - oil change | 23.11.07 |
TRANSMISSION 711.1 in MODEL 460, 461.227 /328 /329 /337 /338 /341 /367 /368 /401 /402 /404 /405 /456
TRANSMISSION 711.2 in MODEL 460, 461.219
TRANSMISSION 717.4 in MODEL 460, 461.229 /238 /239 /249 /266 /267 /323 /403 /450 /451 /452 /454 /455 /458 /459, 463.200 /204 /207 /220 /221 /224 /225 /227 /228 /304 /307 /324 /325 /327 /328
P26.00-0289-01
P26.00-0288-01
1 Oil filler plug
2 Oil drain plug
1 Oil filler plug
2 Oil drain plug
| Removing | ||
1 | Clean the area around the oil filler screw (1) and oil drain screw (2) on the transmission | ||
| The oil should only be changed when the transmission is at normal operating temperature. The vehicle must be horizontal when the oil is changed. | ||
2 | Remove and clean screw plugs | Drain the oil completely. | |
3 | Check seal rings | Replace according to condition. | |
| Install | ||
4 | Screw in oil drain screw (2) | Transmission 711.1/2 | |
Transmission 717.4 | |||
5 | Pour in oil until it reaches lower edge of filler opening | Transmission 711.1/2 | |
Transmission 717.4 | |||
6 | Screw in oil filler screw (1). | Transmission 711.1/2 | |
Transmission 717.4 |
Housing
Number | Designation | Trans-mission 717.4 | |
BA26.40-P-1003-01A | Oil drain plug | Nm | 60 |
BA26.40-P-1004-01A | Oil filler plug | Nm | 60 |
Housing
Number | Designation | Trans-mission 711.1/2 | ||
BA26.40-P-1001-01B | Oil drain plug | Nm | 70 | |
BA26.40-P-1002-01B | Oil filler plug | Nm | 60 | |
Transmission complete
Number | Designation | Transmission 717.4 | ||
BF26.10-P-1001-01A | Gear oil | Filling capacity | Liters | 1.5 |
Specifications for | Sheet | |||
Operating Fluids | Sheet | |||
Sheet | ||||
Transmission complete