AP25.20-W-2981D | Clutch actuation - replace brake fluid | 9.8.06 |
TRANSMISSION 715.320 in MODEL 950, 952, 953, 954 except CODE (IY2) Hydraulic fluid as per sheet 345.0
TRANSMISSION 715.320 in MODEL 375.3 except CODE (IY2) Hydraulic fluid as per sheet 345.0
TRANSMISSION 715.320 in MODEL 970, 972, 974, 976 except CODE (IY2) Hydraulic fluid as per sheet 345.0
W25.20-0017-09
1 Connecting cable (bleeder unit)
2 Protective cap
3 Protective cap
7 Bleed valve
8 Bleeder hose
4 Protective cap
5 Bleed valve
6 Bleed valve
Danger! | Risk of poisoning caused by swallowing brake fluid. Risk of injury caused by brake fluid coming into contact with skin and eyes. | Pour brake fluid only into suitable and appropriately marked containers. Wear protective clothing and eye protection when handling brake fluid. | |
| Brake fluid notes | All models | |
1 | Unscrew cap from expansion reservoir and extract old brake fluid | The replenishment hole must still be covered with brake fluid. | |
2 | Connect bleeder unit | Pay attention to operating instructions supplied by manufacturer | |
(pneumatic) | |||
(electric) | |||
Brake fluid as per Specifications for Operating Fluids | |||
Sheet 331.0 | |||
3 | Connect breather hose (8) of brake fluid receptacle to vent valve (5) | ||
4 | Open the bleed valve (5), allowing it to remain open until the brake fluid emerging through the hose (8) is free of air bubbles | ||
5 | Close bleeder valve (5), push on dust cap | ||
6 | First repeat procedure 3 to 5 at the bleed valve (6), then at the bleed valve (7) | ||
7 | Disconnect bleeder unit | Pay attention to operating instructions supplied by manufacturer | |
8 | Correct fluid level in expansion reservoir and screw on cap | ||
9 | Check bleeder valves for leaks |
Commercially available tools