Clutch actuation - replace brake fluid · ap2520w2981a · Mercedes-Benz WIS

AP25.20-W-2981A

Clutch actuation - replace brake fluid

5.4.11

TRANSMISSION 715.5 in MODEL 375.4 except CODE (IY2) Hydraulic fluid as per Sheet 345.0

TRANSMISSION 715.5 in MODEL 930, 932, 933, 934
except CODE (GE2) Electronic drive control II
except CODE (IY2) Hydraulic fluid as per Sheet 345.0

TRANSMISSION 715.5 in MODEL 940, 942, 943, 944 except CODE (IY2) Hydraulic fluid as per Sheet 345.0

TRANSMISSION 715.5 in MODEL 950.0 /1 /2 /3, 952.0 /1 /2 /3, 953.1 /3, 954.0 /1 /2 except CODE (GE1) Electronic drive control

TRANSMISSION 715.5 in MODEL 375.3, 950.5 /6, 952.5 /6, 953.6, 954.5 except CODE (IY2) Hydraulic fluid as per Sheet 345.0

TRANSMISSION 715.5 in MODEL 957
except CODE (IY2) Hydraulic fluid as per Sheet 345.0
with CODE (GS2) Gear control

W25.20-0001-06

Shown on Actros

1 Connector for brake fluid changer

2 Bleed valve

3 Venting hose

 Danger!	Risk of poisoning caused by swallowing brake fluid. Risk of injury caused by brake fluid coming into contact with skin and eyes.	Only pour brake fluid into suitable and appropriately marked containers. Wear protective clothing and eye protection when handling brake fluid.	AS42.50-Z-0001-01A
	Brake fluid notes		AH42.50-P-0001-01A
1	Unscrew cap from expansion reservoir and extract old brake fluid.	 The run-on opening in the expansion reservoir must still be covered with brake fluid.
2	Connect brake fluid changer connector (1) and switch on the brake fluid changer	 Pay attention to manufacturer's operating instructions. Brake fluid change unit gotis://B_42/43.2_01.1
	Brake fluids (DOT 4 plus)	Sheet 331.0	BB00.40-P-0331-00A
3	Remove protective cap and connect bleed hose (3) of brake fluid receptacle to bleed valve (2)
4	Open bleed valve (2) on clutch booster until new brake fluid escapes free of bubbles at the bleed hose (3)
5	Close bleed valve (2), remove bleed hose (3) and press on dust cap
6	Switch off brake fluid changer and detach connector for brake fluid changer (1)	 Pay attention to manufacturer's operating instructions.
7	Correct the fluid level in the expansion reservoir and screw on cap
	Brake fluids (DOT 4 plus)	Sheet 331.0	BB00.40-P-0331-00A
8	Check tightness of breather valve (2)
9	Carry out minor teach-in process on the control unit	with code (GS2) Gear control	AR54.21-W-0007-01A
		with code (GS7) Gear control II	AR54.21-W-0007-01C

Clutch actuation - replace brake fluid