Replace oil filter element

AP18.20-S-0100-04EF

Replace oil filter element

Engine

622 in model 447

Modification notes

06.03.2020

Work procedure revised

The whole document

 Oil filter

Number

Designation

Engine 622 in model 447

BA18.20-N-1001-01U

Threaded cap to oil filter housing

Nm

25

Shown on engine 622.9

1

Threaded cap

2

Sealing ring

3

Oil filter element

Shown on engine 622.8

1

Threaded cap

2

Sealing ring

3

Oil filter element

1

Position a suitable receptacle under threaded cap (1).

2

Unscrew threaded cap (1) and allow engine oil to flow out.

 Engine 622.8 in model 447
Use  socket wrench.

3

Remove threaded cap (1).

4

Unclip oil filter element (3) from the threaded cap (1) by pressing at the sides.

 Ensure that no foreign bodies get into the filter housing. Never wipe out the filter housing.
Damage may occur otherwise.

5

Replace sealing ring (2).

6

Clip new oil filter element (3) into threaded cap (1).

7

Screw in threaded cap (1) with oil filter element (3) and tighten   .

 Engine 622.8 in model 447
Use  socket wrench.