Replace oil filter element

AP18.20-B-0100-04DD

Replace oil filter element

Engine

926.942 in model 382.171/176

1

Loosen screw cap (2) with SW 36 mm socket wrench (1) or  SW 94 mm (14-corners) socket wrench (1) and allow oil to drain from oil filter housing

2

Remove screw cap (2) with filtering element (4) and snap out of place by side pressing it (4)

 Make sure that no foreign matter enters the filter housing and under no circumstances clean the oil filter housing using cloth or tow.

3

Replace sealing ring (3) and install the new filtering element (4) on screwed cover (2)

4

Install screwed cover (2) with oil filtering element on the filter housing and tighten using SW 36 mm (1) socket wrench or  SW 94 mm socket wrench (14 corners) (1)