Engine: changing the oil and replacing the filter

AP18.00-T-0101A

11.5.98

ENGINE 441.980 in MODEL 613.355

ENGINES 402.970, 446.938 in MODELS 613.455 /485

ENGINES 447, 489 in MODEL 671

Engine: changing the oil and replacing the filter

T01.45-0001-11

Shown on model 671

1 Oil drain screw

T18.20-0001-02

Illustrated on model 671

2 Oil drain screw at oil filter bowl

3 Oil filler plug to oil filter head

T18.20-0002-02

	Only change engine oil when engine is at normal operating temperature
1	Detach lower engine compartment paneling	For model 671	AR61.20-T-1105AA
		For models 613.355/ 455/ 485	AR61.20-T-1105B
2	Open left rear service flap
3	Open engine compartment flap and additional at rear
4.1	Drain oil	 Unscrew oil drain screw at oil pan (1) and drain oil completely.
4.1.1	Screw in oil drain screw of oil pan (1)	 Replace seal for oil drain screw, clean oil drain screw.
4.2	Extract engine oil		AP18.00-T-0101-02A
			*WE58.40-Z-1005-22A
5	Replace oil filter element		AP18.00-T-0101-06N
6	Pour in engine oil through the oil filler neck		*BF18.00-N-1001-01D
	Check
 Danger!	Risk of accident caused by vehicle starting off by itself when engine is running. Risk of injury caused by contusions and burns when working in engine during starting procedure	 Secure vehicle to prevent it from moving off by itself. Wear closed and snug-fitting work clothes. Do not grasp hot or rotating parts.	AS00.00-Z-0005-01A
7	Crank engine by operating the starter	 When operating the starter, at the same time press the engine stop button to prevent the engine from starting. Observe oil pressure gauge! It must indicate pressure after a few seconds. Do not operate starter for more than 20 seconds. After this, wait one minute.  If no system pressure is exists, pull up accelerator.
8	Start engine	 Run engine until warm.
9	Check oil drain screw and filler plug for leaks
10	Turn off engine	Wait about 5 minutes before inspecting oil level, adjust to correct level if necessary.
11	Install lower engine compartment paneling.	For model 671	AR61.20-T-1105AA
		For models 613.355/ 455/ 485	AR61.20-T-1105B
12	Fill automatic engine oil replenishment reservoir	 Only if automatic engine oil replenishment system fitted.

 Engine lubrication

Number	Designation			Engine 402.970	Engine 441.980	Engine 446.938


BF18.00-N-1001-01D	Engine oil	Filling capacity with oil filter	Liters	25.5	18.5	25.5
		Capacity with oil filter and heat exchanger	Liters	28.5	-	28.5
		Automatic engine oil replenishment reservoir	Liters	-	-	-
		Specifications for Operating Fluids	Sheet	BB00.40-P-0228-01A	BB00.40-P-0228-01A	BB00.40-P-0228-01A
			Sheet	BB00.40-P-0228-03A	BB00.40-P-0228-03A	BB00.40-P-0228-03A
			Sheet	BB00.40-P-0228-05A	BB00.40-P-0228-05A	BB00.40-P-0228-05A

 Engine lubrication

Number	Designation			Engines 447, 489


BF18.00-N-1001-01D	Engine oil	Filling capacity with oil filter	Liters	20.5...24.5
		Capacity with oil filter and heat exchanger	Liters	-
		Automatic engine oil replenishment reservoir	Liters	16
		Specifications for Operating Fluids	Sheet	BB00.40-P-0228-01A
			Sheet	BB00.40-P-0228-03A
			Sheet	BB00.40-P-0228-05A

Workshop equipment

WE58.40-Z-1005-22A

Engine oil extractor

เอกสารที่อ้างถึง