1 | Oil filter element |
2 | Drain screw |
3 | Cap |
G18.00-3200-04
Warning | Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | |
Caution | Risk of injury to skin and eyes due to handling of engine oil. Risk of poisoning caused by swallowing engine oil | Wear protective gloves, protective clothing and safety glasses. | |
Topical note | Notes on avoiding damage through contamination and foreign objects | ||
Notes on engine oil and filter changes | |||
Draining | |||
1 | Replace oil filter element (1). | ||
Threaded cap to oil filter housing | |||
Socket wrench bit | |||
2 | Remove lower center engine compartment lining. | ||
| |||
3 | Position a suitable receptacle under drain screw (2), unscrew drain screw (2) and drain engine oil completely. | ||
Pour in | |||
4 | Screw in drain screw (2). | Replace seal. | |
Drain screw to oil pan | |||
5 | Add engine oil at filler neck. | Engine oil | |
6 | Screw cap (3) onto filler neck. | ||
| Check | ||
7 | Check for leak tightness when engine is running. | | |
Perform a visual inspection only and then switch off the engine. | |||
8 | Mount lower center engine compartment lining. | ||
| |||
Attach center lower engine compartment lining only after completion of all maintenance operations. | |||
9 | Check oil level. | If necessary, | |
| |||
Correct oil level. | |||
10 | Confirm conducted operations in maintenance booklet or in Digital Service Booklet (DSB). |
642 589 00 09 00
Socket wrench bit