1 | Cap |
2 | Oil filter cover |
3 | Sealing ring |
4 | Oil filter element |
5 | Drain screw |
6 | Oil-dipstick guide tube |
7 | Oil dipstick |
8 | Plug |
G18.00-3172-06
Danger | Risk of explosion due to escaping combustible gas or overheating of gas cylinders.Risk of injury caused by burns to skin and eyes. Risk of frostbite to body parts caused by escaping gas and by touching components near the valves when emptying gas cylinders. Risk of poisoning or suffocation caused by inhaling gas. | Remove any sources of ignition. | |
Warning | Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | |
Caution | Risk of injury to skin and eyes due to handling of engine oil. Risk of poisoning caused by swallowing engine oil | Wear protective gloves, protective clothing and safety glasses. | |
Notes on work safety regulations for vehicles with natural gas-powered engines | |||
Draining | |||
1 | Replace oil filter element (4). | ||
Oil filter cover to oil filter housing | |||
2.1 | Extract engine oil through oil dipstick tube (6). | When extracting engine oil using engine oil extractor. | |
| |||
2.2 | Drain engine oil at drain screw (5). | When draining engine oil from oil pan. | |
| |||
Oil drain screw to oil pan | |||
Pour in | |||
3 | Add engine oil. | ||
| |||
Engine oil | |||
| Check | ||
4 | Start engine and run at idling speed. | See information from body manufacturer. | |
If the oil pressure has not built up 10 seconds after the start, | |||
| |||
Switch off the engine and determine the cause. | |||
Engine oil pressure | |||
5 | Switch off engine. | See information from body manufacturer. | |
6 | Check and correct engine oil level. | Check engine oil level after waiting at least 5 min. after switching off the engine. | |
Engine oil | |||
7 | Check oil filter cover (2) and, if necessary, drain screw (5) of oil pan for leak tightness. | Visual inspection. |