1 | "Back" button |
2 | Finger navigation pad |
3 | Multifunction display |
D00.20-1160-76
Warning | Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | |
Warning | Risk of burn injuries, suffocation and poisoning when working on the exhaust system and the components connected to it. Risk of suffocation and risk of poisoning caused by inhalation of gaseous and solid components of the exhaust. Risk of poisoning caused by skin contact with solid components of the exhaust. | Wear protective clothing and safety glasses. Use the extraction system. Move people out of the hazard area. | |
Preparatory activity | |||
1 | Using swipe movements on the finger navigation pad (2) to select the "Total distance" standard display in the multifunction display (3). | The multifunction display (3) may not have any fault messages on it. | |
2 | Press and hold "Back" (1) button for 2 seconds and press on finger navigation pad (2). | The multifunction display (3) then shows the Workshop menu with the menu items: "Vehicle data", "Dynamometer test", "Change brake pad", "ASSYST PLUS". | |
3 | Start engine. | | |
To receive a valid measurement value, the engine must have been running for at least 120 s since starting and the coolant temperature must be 80 °C. | |||
4 | Make swipe movements on the finger navigation pad (2) to select the "Vehicle data" menu item in the workshop menu. | ||
| Check | ||
5 | Make swipe movements upwards on the finger navigation pad (2) to check the engine oil level in the vehicle data menu. | The oil level measurement by the vehicle is not completed as long as the multifunction display (3) shows "Add -,- l for maximum oil level", and the displayed oil level is not valid. | |
If the displayed value indicates that the engine oil level exceeds a maximum of 0.1 l or 0.1 qt or if the engine oil level is below a maximum of 0.2 l or 0.2 qt, | |||
| |||
engine oil level OK. | |||
If the displayed value indicates that the engine oil level exceeds < 0.1 l or 0.1 qt, | |||
| |||
drain off displayed oil filling capacity and repeat check from operation step 1. | |||
| |||
| |||
If the displayed value indicates a drop in the engine oil level of < 0.2 l or 0.2 qt, | |||
| |||
add displayed oil filling capacity and repeat check from operation step 1. | |||
| |||
| |||
Finishing activity | |||
6 | Press and hold "Back" button (1) for 2 seconds until "Total distance" standard display appears in multifunction display (3). | ||
7 | Switch electronic ignition lock (EZS) control unit to position "0". |