AP14.40-W-1481A | Replace AdBlue filter | 22.3.11 |
ENGINES 457.9 in MODEL 375.4, 940, 942, 943, 944
with CODE (MS4) BlueTec 4
with CODE (MS5) BlueTec 5
ENGINES 541.9 in MODEL 930, 932, 933, 934
with CODE (MS4) BlueTec 4
with CODE (MS5) BlueTec 5
ENGINES 542.9 in MODEL 930, 932, 934
with CODE (MS4) BlueTec 4
with CODE (MS5) BlueTec 5
ENGINES 900.9 in MODEL 375.1, 970, 972, 975, 976
with CODE (MS4) BlueTec 4
with CODE (MS5) BlueTec 5
ENGINES 902.9 in MODEL 375.3, 950.5 /6, 952.5 /6, 953.6, 954.5, 957.5 /6
with CODE (MS4) BlueTec 4
with CODE (MS5) BlueTec 5
ENGINES 902.9 in MODEL 375.15, 970, 972, 974, 975, 976
with CODE (MS4) BlueTec 4
with CODE (MS5) BlueTec 5
ENGINES 924.9 in MODEL 970, 972, 974, 975, 976
with CODE (MS4) BlueTec 4
with CODE (MS5) BlueTec 5
ENGINES 925.9 in MODEL 970, 972, 974
with CODE (MS4) BlueTec 4
with CODE (MS5) BlueTec 5
ENGINES 926.9 in MODEL 950.5 /6, 952.5 /6, 953.6, 954.5, 957.38 /5 /6
with CODE (MS4) BlueTec 4
with CODE (MS5) BlueTec 5
N14.40-2005-11
Illustrated on model 930
1 Filter element
2 Pump filter unit
| Remove/install | ||
Danger! | Risk of burn injuries and scalding when working at AdBlue lines and the components attached to them. Risk of injury to skin and eyes when handling AdBlue. Risk of poisoning caused by swallowing AdBlue | Pour AdBlue into suitable containers only. Wait until the pressure is released before starting any work on the exhaust aftertreatment system. | |
| Notes on use, material properties and handling of AdBlue® | ||
1 | Detach feed and return line on pump-filter unit (2) | | |
2 | Place suitable receptacle for escaping AdBlue fluid under pump filter unit (2) | ||
3 | Remove air filter element (1) | Installation: Apply light coating of MB silicon grease to O-ring on filter element (1) and filter cup before fitting. It is not necessary to bleed the system, it is self-bleeding. | |
The lubricant to be used must be the specified MB silicon grease and, when using it, make sure that it is applied extremely sparingly, as otherwise it may damage the exhaust aftertreatment system. | |||
Engine 457.9 | |||
Engine 541.9, 542.9 | |||
Engines 900.9, 902.9, 924.9, 925.9, 926.9 | |||
4 | Install in the reverse order |
Exhaust aftertreatment
Number | Designation | Engine | |||
BA14.40-N-1001-02B | Filter cup on pump module | Nm | 32 | ||
Exhaust aftertreatment
Number | Designation | Engine 541.9 | Engine 542.9 | |||
BA14.40-N-1001-02A | Filter cup on pump module | Nm | 32 | 32 | ||
Exhaust aftertreatment
Number | Designation | Engine | |||
BA14.40-N-1001-02C | Filter cup on pump module | Nm | 32 | ||
Clamping device
000 589 54 37 00
Repair materials
Number | Designation | Order number |
BR00.45-Z-1019-06A | ABS sensor grease | A 000 989 62 51 10 |