ap1415t1450c

Exhaust brake - checking condition and adjustment

ประเภท ap · หัวข้อ 14.15 · เวอร์ชัน 0100 · 2005-07-12

ใช้กับ: ENGINE 441.980

ไม่มีใน “th” แสดงเป็น อังกฤษ

ตำแหน่ง

กลุ่มฟังก์ชัน 1 Engine › 14 Exhaust manifold, engine brake, emission control system › 14.15 Engine brake — ซีรีส์ 441 (รุ่น 980)

EinPAS 21 Brakes/vacuum system/compressed-air system › 21.20 Engine brake › 21.20.43 Engine brake, complete — ซีรีส์ 441 (รุ่น 980)

AP14.15-T-1450C

Exhaust brake - checking condition and adjustment

3.5.00

ENGINE 441.980

Exhaust brake - checking condition and adjustment
Exhaust brake - checking condition and adjustment

T54.25-0031-01

1 Engine brake
stage 1

2 Engine brake
stage 2

3 Retarder stage 1

4 Retarder stage 2

5 Retarder stage 3

10 Throttle flap lever

11 Notch

T14.15-0009-01

Testing

Condition

1

Remove maintenance flap above engine in interior

2

Inspect engine brake cylinder, transmission parts and throttle valve shafts for wear

Replace any parts which are not in proper condition subject to separate repair order.

3

Inspect tight installation of throttle valve levers (10) on throttle valve shafts

Setting

4

Inspect position of throttle valve shaft in off position

When engine brake is in off position, the notch (11) must be positioned parallel to the flow direction of the exhaust gases.

5

Start engine and operate engine brake at operating lever in stage 1 (1) and stage 2 (2) with accelerator pedal in full throttle position

Run engine up to maximum revs only when warm.
In the operating position of the engine brake, the notch (11) must be positioned at right angles to the flow direction of the exhaust gases.

6

Install maintenance flap above engine in interior