Check visible area of poly-V belt for wear

AP13.22-P-1352PM

23.3.12

ENGINE 642.910, 646.963 in MODEL 203

ENGINE 646.962 in MODEL 203

ENGINE 642.910, 646.966 in MODEL 209

P13.22-2129-01

1 Poly-V-belt

Modification notes

2.3.12

Check poly-V belt for damage, added

Operation step 2, 5

 	Remove/install
1	Open engine hood	Model 203	AR88.40-P-1000P
		Model 209	AR88.40-P-1000Q
	Checking
2	Check poly-V belt (1) for wear and damage at visible points and compare with damage profiles	 Replace poly-V belt (1) if necessary, subject to separate invoice.	AP13.22-P-1351-01A
3	Lift vehicle on vehicle lift		AR00.60-P-1000P
4	Remove bottom part of noise encapsulation	 Installation: Only install lower noise encapsulation after all maintenance operations have been completed.	AR94.30-P-5300P
	Checking
5	Check poly-V-belt (1) for wear and damage at points visible when vehicle is raised, and compare with damage profiles	 Replace poly-V belt (1) if necessary, subject to separate invoice.	AP13.22-P-1351-01A
6	Install in the reverse order