Shown on engine 176 in model 463.234 with code ZQ0 (G 500 4x42) |
1 | Poly-V belt for alternator |
2 | Poly-V belt for refrigerant compressor |
P13.22-2225-06
Warning | Risk of injury. Moving parts can pinch, crush or, in extreme cases even sever extremities. | No parts of the body or limbs should be within the operating area of mechanical components when moving components. | |
Danger | Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer. | |
| Remove | ||
1 | Remove front engine compartment lining at bottom. | ||
| Engine 176 in model 463 | ||
| Engine 176 in model 463.234 | ||
| Engine 176, 177 in model 463 | ||
| Check | ||
2 | Check alternator poly-V-belt (1) in areas visible when vehicle is raised for wear and damage, and compare with damage profiles. | ||
Commercially available devices/tools | |||
If the alternator poly-V-belt (1) is worn or damaged: | |||
| |||
Replace alternator poly-V-belt (1). | |||
After obtaining special order. | |||
3 | Check refrigerant compressor poly-V-belt (2) in areas visible when vehicle is raised for wear and damage, and compare with damage profiles. | ||
Commercially available devices/tools | |||
If the refrigerant compressor poly-V-belt (2) is worn or damaged: | |||
| |||
Replace refrigerant compressor poly-V-belt (2). | |||
After obtaining special order. | |||
| Install | ||
4 | Install front engine compartment lining at bottom. | ||
| Engine 176 in model 463 | ||
| Engine 176 in model 463.234 | ||
| Engine 176, 177 in model 463 |